beautypg.com

Care and cleaning, Warning, Cleaning – Dacor EF42NBSS User Manual

Page 15: Changing the light bulbs

background image

13

Care and Cleaning

Cleaning

Important information to know about glass shelves and

covers:
Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

Both the refrigerator and freezer sections defrost automatically.

However, clean both compartments about once a month to avoid

build-up of odors. Wipe up spills immediately.

To Clean Your Refrigerator:

Remove the top grille and turn off the main power switch. See

1.

Turning the Main Power Switch On/Off on page 3.
Remove all removable parts from inside, such as shelves,

2.

crispers, etc.
Hand wash, rinse, and dry removable parts and interior

3.

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

Do not use abrasive or harsh cleaners such as window

„

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior and

door liners or gaskets. Do not use paper towels, scouring

pads or other harsh cleaning tools. These items can scratch

or cause damage.
To help remove odors, you can wash interior walls with a

„

mixture of warm water and baking soda (2 tbs to 1 qt [26 g

to 0.95 L] of water).

Wash stainless steel and painted metal exteriors with a clean

4.

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners, or cleaners containing

chlorine. Dry thoroughly with a soft cloth. Additionally, to avoid

damage to painted metal exteriors, apply appliance wax (or

auto paste wax) with a clean, soft cloth. Do not wax plastic

parts.
NOTE: To keep you stainless steel surfaces looking like new

and to remove minor scuffs or marks, you may use Dacor

Stainless Steel Cleaner. Use it according to the directions on

the bottle.

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces,

dispenser covers or door gaskets. If unintentional contact does

occur, clean the plastic part with a sponge and mild detergent

in warm water. Dry thoroughly with a soft cloth.
Clean the condenser coils located behind the top grille

5.

ventilation panel regularly. Coils may need to be cleaned as

often as every other month. This may help save energy. Use

a vacuum cleaner with an extended attachment to clean the

condenser coils when they are dusty or dirty.
Turn the main power switch on and replace the top grille.

6.

Changing the Light Bulbs

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure

to replace the bulb with one of the same size and shape. The

dispenser light requires a heavy duty 10-watt bulb. All other lights

require a 40-watt maximum appliance bulb. Replacement bulbs

are available from your Dacor dealer or appliance store.

Remove the top grille and turn off the main power switch. See

1.

Turning the Main Power Switch On/Off on page 3.
Remove light shield when applicable as shown.

2.

NOTE: To clean a light shield, wash it with warm water and a

liquid detergent. Rinse and dry the shield well.
Remove light bulb and replace with one of the same size,

3.

shape and wattage.
Replace light shield when applicable as shown.

4.

Turn the main power switch on and replace the top grille.

5.

Dispenser Light (dispensing

models only)

Reach through the dispenser area

to remove and replace light bulb.

Refrigerator Control Panel Lights

Use a ¼” hex nut driver to remove and replace the light shield.

Freezer and Crisper Lights

Remove the light shield by grasping the top and bottom and

„

squeezing in toward the center. Once the hooks on the shield

are free from the freezer or crisper

lining, remove the shield.
Replace the light shield by

„

squeezing the top and bottom

toward the center and inserting the

hooks into the slotted holes.

WARNING

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

A

A. Dispenser light

B

B. Light shield