Dacor EF36LNFSS - Manual

INSTALLATION
INSTRUCTIONS
Preference™ Handle Kit,
PN AFP36H2
REFRIGERATOR MODELS: EF36LNFSS and EF36RNFSS
Installation Preparation:
STEP 1: Using a T20 Torx driver, remove the four (4)
handle mounting studs from the front of the
refrigerator. Retain the mounting screws and
studs.
Handle Mounting
Stud Locations
Existing handle
mounting screw
(keep)
Existing mounting
stud (keep)
Part No. 106238 Rev. A
Parts Included
Preference Style Handles (1 large, 1 small) Plastic Washers (4)
Tools Required
3/32” Allen wrench (not supplied) •
T20 Torx driver (EF36BNFSS Only)
•
Model EF36RNFSS shown