Tri Tool 212B Flange Facer - Manual (Page 8)

8
TRI TOOL INC.
92-0291 : Rev. 921230
Materials: Most stainless steels, carbon steels, inconels, etc., provided the Rockwell
hardness is less than Rc 35.
The Mandrel for the Model 212B is used to provide a mounting range from 3.31” to
13.09” (84.1 mm to 332.5 mm) inside diameter.
CLEARANCES (with the Model 212B attached)
13.00" (330.2 mm)
maximum from the centerline
of the pipe or tube
Rotating Parts Diameter 26.00" (660.4 mm)
Radial
CUTTING CAPACITIES
3.44" to 24.00" dia
(87.4 mm to 609.6 mm dia)
Auto Feed Travel 9.50" (241.3 mm)
.013" or .026" per revolution
(.33 mm or .66 mm per revolution)
Maximum chip width .200" (5.1 mm)
Range
Feed Rate