Teletronics WINC900A - Manual (Page 40)

40
APPENDIX C - WINC 900A Specification
Serial Interface
Asynchronous data rates 1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4 Kbps
Asynchronous data format Data: 7 or 8 bits, Parity: even/odd/none
Stop bit: 1 or 2
Flow Control XON/XOFF, RTS/CTS
Connector RS-232, DB-25 female
Operation Full-Duplex
Compatibility Hayes AT Command Set
Radio
Power Output 1, 10, 100, 1000 milliwatts (selectable)
Frequency Band 902-928 MHZ
Independent Channels 8
Range 1 kilometer outdoors; 100 meters indoors
Antenna Omnidirectional "rubber ducky"
Communication
Modulation DQPSK
Spread Spectrum Direct-Sequence
Bandwidth per Channel 3 MHZ
Sensitivity -85dbm (not including spreading gain)
Power
Primary Power 100-250 V AC @50/60 Hz, 0.3-0.7A, auto-switching
Internal Power Supply 28 Watts, AC