Ii. unit login info – Teletronics EZ Bridge 802.11B 100mW User Manual
Page 2
Section - B Quick Setup Guide
I. Initial Setup
Requirements
¸
One or more PCs (desktop or notebook) with Ethernet interface.
¸
TCP/IP protocol must be installed on all PCs. (Refer to User Manual for additional information)
¸
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
¸
All wireless devices must be compliant with the IEEE 802.11B specifications.
¸
Microsoft Internet Explorer 5.0 or later or Netscape Navigator 4.7 or later.
* To avoid damage to the EZ Bridge, do not connect the power adapter to a power source until all other
connections has been established.
II. Unit login info
After all initial setup requirements are checked type the following IP under the address bar of a web browser to
login.
EZ Bridge Default IPs
In AP Mode: 192.168.1.99
In Client Mode: 192.168.1.99*
Authentication: Nothing needs to be typed for login and password.*
* The default factory setting for EZ Bridge 802.11B.