Teletronics EZStation2 - Manual (Page 30)

Firewall - IP Filtering
Entries in this table are used to restrict certain types of data packets from your local
network to Internet through the Gateway. Use of such filters can be helpful in securing or
restricting your local network.
Item
Description
Enable IP Filtering Click to enable the IP filtering security function.
Local IP Address
Protocol
Comments To restrict data transmission from local network
on certain IP addresses, fill in the IP address and
the protocol, also put your comments on it.
The Protocol can be TCP, UDP or Both.
Comments let you know about whys to restrict
data from the IP address.
Apply Changes Click the Apply Changes button to register the IP
address to IP filtering list.
Reset Click the Reset button to abort change and
recover the previous configuration setting.
Delete Selected Click to delete the selected IP address that will be
removed from the IP-filtering list.
Delete All Click to delete all the registered entries from the
IP-filtering list.
Reset Click the Reset button to abort change and
recover the previous configuration setting.