Tech Source Raptor 4000 Series (for Linux) User Manual

Page 35

Raptor 4000 Series: Reference Manual

Part #65-0271-01

Option "Mode" "mox32"
Option "ScaleCursPos" "on"
Screen 0
Option "Head" "0"
# Option "DDCCheck" "off"
# Option "Rotation" "+r"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection

4.6.2 MOX Modes

MOX (Multiple Overlay Extension) provides support for multiple
drawing layers on graphics cards. MOX is available on all Raptor
cards with the exception of the Raptor 3500e card. Details about
MOX can be obtained in a technical white paper available
separately from Tech Source.

The following MOX modes are supported on the Raptor 4000
Series cards.

mox24

MOX, 8-bit Normal, 21-bit Group, 13-bit Absolute

mox32

MOX, 8-bit Normal, 32-bit Group, 24-bit Absolute

4.7 Setting Resolution on Raptor 4000 Series

Cards

By default, the Xserver will pick up the resolution specified by
DDC. If the attached monitor is not DDC capable, it will pick up the
resolution specified in the

xorg.conf

file.

NOTE: MOX support is only available on the head closest to
the pci slot (Head0).