Tech Source Raptor 4000 Series (for Linux) User Manual

Page 20

Raptor 4000 Series: Reference Manual

Part #65-0271-01

SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
# TSI Raptor 4000 Configuration Sections

3.8.1

Monitor Section

This section contains default configuration information for the
monitor and should remain unchanged.

3.8.2 Device Section

Identifier:

Each instance of a Raptor card should have a
unique identifier. This identifier is used in the
Screen section.

NOTE: The

BusID

value in the configuration file will be updated

automatically during software installation. The

BusID

will need to

be updated manually for additional Raptor Series cards or slot
changes. Please see the description below for details.

BusID:

Depending on the machine and the slot the
card is in, it might receive a unique

BusID

When the driver attaches, it will print out the
device name and

BusID

. To check the

BusID

, type

dmesg|grep rapafp.

The

output should look similar to the following:

TSI: rapafp0 (BusID 41:0:0) is
RAPTOR 4000 @ 1280x1024
TSI: rapafp1 (BusID 41:0:0) is
RAPTOR 4000 @ 2048x2048.

In the example above, the Raptor 4000 has a