Tech Source Raptor 4000 Series (for Linux) User Manual

Page 23

Raptor 4000 Series: Reference Manual

Part #65-0271-01

SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
# TSI Raptor 4000 Configuration Sections

Section "Screen"
Identifier "Raptor4000-1"
Device "Rapafp1"
Monitor "TSI-FP DVI"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection

3.8.4 Server Layout Section

This is the section which specifies the server layout for either
single-screen or multi-screen configuration.

The following example shows the

ServerLayout

Section for a

single-screen configuration on the Raptor 4000 Series device.

Section "ServerLayout"

Identifier "XFree86 Configured"
Screen 0 "Raptor4000-0" 0 0

NOTE: The ServerLayout section should already exist in

your

xorg.conf

file. This section must be modified

manually to include the Raptor card.