Tech Source Raptor DL-Lite Drivers for HP-UX - Manual (Page 16)

Raptor DL-Lite/HP-UX Installation and Reference Manual
3-6
system after the software has been installed, then the Raptor
drivers must be reconfigured in order to create the proper device
nodes under
/dev
(i.e.
/dev/rapdlt0
,
/dev/rapdlt1
, etc.). To
reconfigure the Raptor drivers, issue the following two commands:
On HP-UX 10.20:
# swconfig -u TSIFTHPUX_10
# swconfig TSIFTHPUX_10
On HP-UX 11.0:
# swconfig -u TSIFTHPUX_11
# swconfig TSIFTHPUX_11
On HP-UX 11i:
# swconfig -u TSIFTHPUX_11i
# swconfig TSIFTHPUX_11i
3.4 Device Resolution
The resolution for Raptor DL-Lite card is fixed at 2560 x
1600@60Hz.