Tech Source Raptor DL-Lite Drivers for HP-UX - Manual (Page 14)

Raptor DL-Lite/HP-UX Installation and Reference Manual
3-4
4. Insert the CD-ROM labeled “Raptor Drivers for HP-UX" into the
drive.
5. Run
swinstall
. Accept all the path defaults.
6. The
swinstall
program will automatically try to locate,
mount, and read any CD-ROM device present. If the program
is successful, it will display
TSIFTHPUX_11i
. If this is not
displayed, please proceed to the section titled, “Mounting the
CD-ROM Manually.” See Section 3.2.4.
7. Move the cursor down to the package and highlight it by
pressing .
8. Press to activate the menu bar. Move the cursor across
to 'Actions' and press . Move the cursor down to
'Install (analysis)' and press .
9. Follow the on-screen instructions to complete installation. If
any warnings or errors are reported, check the Logfile (default:
/var/adm/sw/swagent.log
), correct the errors, then
continue.
3.2.4 Mounting the CD-ROM Manually
When run, the
"swinstall"
program will automatically try to
locate, mount, and read any CD-ROM device present. If it fails,
you may need to mount the CD-ROM by hand.
1. Login as root.
2. Create a mount point, if one does not exist.
# mkdir /CD-ROM
3. Identify the CD-ROM drive device file.
# ioscan -fnC disk
This will display all recognized hard drives and CD-ROM devices.