Tech Source Raptor DL-Lite Drivers for Solaris - Manual (Page 13)

Chapter 3 – Software Installation
3-3
prompt# mount -F hsfs -O -o ro \
/dev/dsk/c0t6d0s0 /cdrom
prompt# cd /cdrom
6.
To install the software, type:
prompt# ./install_all
This script will ask you a number of yes-or-no questions
(generated by Sun's
pkgadd
installation program).
Answer these questions appropriately.
7.
To install the MOX module and libraries, type:
prompt# cd /cdrom/cdrom0/mox
or
prompt# cd /cdrom/mox
[if the CD-ROM was mounted as outlined in Step 5
above]
prompt# pkgadd –d . TSImox
Note: You must install the MOX package in order to use the
MOX extension.
8. Reboot the system to complete the installation.
One new device name is created in the
/dev/fbs
directory for
each Raptor card. It is denoted by
rapdlt#
(where
#
represents an instance number assigned by the operating
system).
Note: Device modes will be created only for cards presently in
the system.