Teac CD-200BT - Manual (Page 12)

12
TASCAM CD-200BT
2 – Names and functions of parts
Display
1 icon
Shows the status of connection with a Bluetooth device.
Indicator Meaning
Blinking Unconnected
Lit Connected
Blinking rapidly Currently pairing
2 Playback mode indicator
This shows the current playback mode.
Indicator Playback mode
None Continuous playback mode
SNGL Single playback mode
RAND Random playback mode
PROG Program playback mode
3 REPEAT indicator
REPEAT appears when the repeat playback function is ON.
4 FOLDER indicator
FOLDER appears when the playback area is set to FOLDER .
5 INTRO indicator
INTRO appears when the intro check function is ON.
6 Current source indicator
This shows the current source.
Indicator Current source
CD CD
BLUETOOTH Bluetooth
None
AUX ( -AUX- appears in the
main display area)
7 Main display area
The track number and time or text information is shown.
The status of the unit (
OPEN , CLOSE , TOC * READ , etc.)
and messages ( NO DISC , etc.) are also shown. Items with
more than eight characters are scrolled when shown.
* TOC means “Table Of Contents,” which is track information
written on the disc
8 Main display information type indicator
When text information is shown in the main display area,
these indicate the type of information.
Indicator Meaning
ALBUM TITLE CD-TEXT album title or current folder
name
ALBUM ARTIST CD-TEXT album artist
TITLE CD-TEXT track title or track title of the
current file (from its tag data)
ARTIST CD-TEXT track artist or track artist of
the current file (from its tag data)
FILE Current file name
Remote control unit (TASCAM
RC-CD200BT)
1 Number (0–9) buttons
Use these buttons to input numbers for track selection. (See
“Selecting by track number” on page 19.)
Track numbers have a maximum of 2 characters for audio
CDs and a maximum of 3 characters for a data CDs.
2 PLAY AREA button
Press to set the playback area of data CDs to ALL PLAY or
FOLDER. (See “Setting the playback area” on page 18.)
3 INTRO CHECK button
Use for intro check playback. The first 10 seconds at the
beginnings of tracks on the CD will be played back one after
another.
During intro check playback, press and hold this button
again to return to ordinary playback mode. (See “Intro Check
function” on page 24.)