Teac CD-200 Rev.C - Manual (Page 17)

TASCAM CD-200
17
4 − Playing back CDs
Selecting a track
There are two ways to select a track. You can move (skip)
to the previous or next track, or you can select a track
directly by its track number.
Skipping to the next or previous track
Press a SEARCH Ô/ (Â/¯) key on the
main unit or a search ( Ô/Â, ¯/) key on
the remote control.
After selecting the track, press the PLAY/READY key
on the main unit or the remote control to start track
playback.
SEARCH Ô/keys
Search Ô/ keys
Selecting by track number
Use the numeric keys (0–9) on the remote control to
directly set a track for playback by number.
Track numbers can have up to two digits for audio CDs and
up to three digits for data CDs.
1 Use the remote control numeric keys (0–9) to input
the track number. Input the track number starting
with the first digit as in the example below.
Numeric
keys
(0 - 9)
ª To select track 1:
Press the “1” key one time.
ª To select track 12:
Press the “1” key followed by the “2” key.
2 Press the
PLAY/READY key on the main unit or the
remote control.
The selected track begins to play.
If you press the STOP key on the main unit or the
remote control, the display stops showing the track
number input and the display returns to its previous
state.
The numeric keys cannot be used to select a track when
in program or shuffle mode.
Search forward and backward
You can search forward and backward in a track while
listening to it.
1 Play or pause the desired track.
2 Press and hold a
SEARCH Ô/ (Â/¯) key
on the main unit or a search ( Ô/Â, ¯/)
key on the remote control to start searching forward
or backward.
3 Release the key that you are holding to stop search-
ing and return the unit to the state it was in before
searching (playback or pause).