Teac DV-RA1000 - Manual (Page 43)

8 – Specifications, etc.
TASCAM DV-RA1000 Owner’s Manual
43
Other connections
DSD inputs (BNC)
Connector BNC connectors x 2
Signal type Sony/Philips SDIF-3 format / DSD-Raw
Signal level 2 V to 5 V (equivalent to 5V TTL)
Input impedance 75
Ω, ±10%
Clock synchronization Must be synchronized to 44.1 kHz at WORD SYNC IN or use internal clock at 44.1 kHz
PCM outputs (XLR)
Connector: 3-pin XLR male x 2 (1: GND, 2: Hot, 3: Cold)
Signal type IEC-60958-4, AES-3-1992
Output frequencies (kHz) 44.1/48, 88.2/96 (double-speed or double-wire), 176.4/192 (double-speed + double-
wire) all ±6%
Data format 16-bit (44.1 kHz, CD-DA), 24-bit (all other PCM recording to DVD+RW media)
Output impedance 110
Ω ±20%
Nominal output level 2–5 Vpp
Intrinsic jitter <0.025UI (4 ns @ 48 kHz)
PCM outputs (RCA)
Connector: RCA (pin) jack x 1
Signal type IEC60958-3
Output frequencies (kHz) 44.1/48, 88.2/96 (double-speed ), all ±6%
Data format 16-bit (44.1 kHz, CD-DA), 24-bit (44.1 kHz/48 kHz, 88.2/96 kHz to DVD+RW media)
Output impedance 75
Ω ±20%
Nominal output level 0.5 Vpp (typical)
Intrinsic jitter <0.025UI (4 ns @ 48 kHz)
DSD outputs (BNC)
Connector BNC connectors x 2
Signal type Sony/Philips SDIF-3 format / DSD-Raw
Signal level 2 V to 5 V (equivalent to 5V TTL)
Output impedance 10
Ω
Clock synchronization Must be synchronized to 44.1 kHz at WORD SYNC IN or use internal clock
WORD SYNC IN
Connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75
Ω ±10%, with THRU automatically engaged
WORD SYNC OUT
Connector BNC
Input voltage 5 V TTL equivalent
Input impedance < 10
Ω
Sampling frequencies (kHz) 44.1, 48, 88.2, 96, 176.4, 192 (PCM) / 44.1 (DSD)
WORD SYNC THRU
Connector BNC
Output voltage 5 V TTL equivalent
Output impedance < 10
Ω
USB 2.0 USB 2.0 Hi-speed Female B-type connector for connection to personal computer