SUUNTO X6OG - Manual (Page 45)

43
When you want to stop the timing, press the Stop/CL button while in the Chrono
mode. The stop time is then displayed on the second row. You can zero the display by
long pressing the
Stop/CL button.
NOTE: If you want to continue the same timing after viewing the lap and split times,
press Start instead of zeroing the display.
NOTE: You must have free space in the memory to be able to start the timing. If the
memory is full, the message “
MEMORY FULL
” is displayed and the Suunto X6 suggests
the oldest memory file to be erased. Erase the suggested file by pressing Suunto or
select and erase another file. After the deletion, you can start the chrono. For more
information about erasing memory files, refer to page 47.
Lap time
The lap time means the time from the last press of the Start button, i.e. from the last
intermediate time to the current time. The lap time runs on the third row.
When you press the Start button, the lap time stops for 3 seconds to display the lap
time and starts running from zero again (for the next lap).
When you stop the timing by pressing Stop/CL, the last lap time is displayed on the
third row.
3.6.2. Use
With the Use function you can define whether the air pressure measurement is used
to represent the altitude or the weather conditions. For more information, refer to
page 26.
To select either Altimeter use or Barometer use, follow these steps:
1. To access the function menu, press
Suunto in the main display.
2. In the function menu, scroll to Use with the arrow buttons and press Suunto.