SUUNTO X6OG - Manual (Page 38)

36
3.5.2. Logbook
The logbook gives you the possibility of recording information regarding, for example,
a hiking trip. When you start the logbook, it starts gathering information about the
cumulative ascents and descents, average ascent and descent rates, highest and
lowest points and specific marks you can set during the trip. When you stop the
logbook, the information gathered thus far is recorded as a logbook file that can be
viewed later. The maximum duration of one logbook is 168 hours = one week. After
this the logbook stops automatically. The Suunto X6 can store 20 logbook files at one
time. More logbooks can be saved to your PC with the help of the PC Interface. For
more information, see page 52.
Starting logbook
To start the logbook, follow these steps:
1. Press
Suunto in the main display.
2. In the function menu, scroll to Logbook with the arrow buttons and press Suunto.
3. Scroll to Start and press Suunto.
If the logbook is not running and there is enough memory left, recording begins. The
message “
LOGBOOK STARTED
” is displayed and you return to the function menu.
If the logbook is already activated, the message “
LOGBOOK ALREADY RUNNING
” is displayed
and you return to the function menu, where the Stop field is displayed in reversed
color.
If there is not enough memory left, the message “
MEMORY FULL
” is displayed and the
Suunto X6 moves to a display that asks you to erase a logbook file.
Select the logbook file to be deleted with the arrow buttons and press Suunto. The file
is deleted from the memory and you return to the logbook menu.