SUUNTO X6OG - Manual (Page 42)

40
A long press activates the backlight and no logbook mark is made. The marks are
added to the logbook file and they can be viewed through the file list (see page 37).
When the mark has been added, the message “
MARK POINT SAVED
” is displayed.
When you have recorded marks, the PC can create a profile that connects them with
a line. With this feature you can, for example, create a simplified altitude profile of
your trip. You can also use marks to compare the difference in time and altitude
between two points of the trip. (Compare with the Differ function on page 35)
3.5.3. Use
With the Use function you can define whether the air pressure measurement is used
to set the altitude or to represent the weather conditions. For more information, refer to
page 26.
To select either Altimeter use or Barometer use, follow these steps:
1. To access the function menu, press
Suunto in the main display.
2. In the function menu, scroll to Use with the arrow buttons and press Suunto. The
alti/baro field is activated.
3. Change the content of the field with the arrow buttons and press Suunto. You
return to the function menu.
3.5.4. Altitude
With this function you can set the reference altitude. For more information about the
reference altitude, refer to page 27.
To set the reference altitude, follow these steps:
1. To access the function menu, press
Suunto in the main display.
2. In the function menu, scroll to Altitude with the arrow buttons and press Suunto.