Super Systems DPL4000 - Manual (Page 5)

Page #5 of 16 ___________________________________________________________________________ M4581 – DPL4000
Charging the Battery Pack
1. Plug the charger into the top of the indicator (located under the
rubber cap).
2. Connect the charger to a wall socket. A dynamic battery symbol
will be visible in the top left corner of the display.
3. When the battery symbol does not change, the battery pack is
fully charged.
4. Disconnect the charger.
The duration of recharging is typically 4 hours.
Buttons and Navigation
To turn on the device, press the Power On/Off button. To open
menus, press an arrow button and then press the shortcut buttons. To
activate a function shown above the shortcut button, press the shortcut
button. To navigate in the menus, press arrow buttons.
0403-033
Figure 2 Buttons
The following numbers refer to Figure 2 above.
1
= Shortcut buttons
2 = Arrow buttons
3 = Power on/off button