Sundance SMT365E - Manual (Page 17)

Version 2.1 Page 17 of 26 SMT365e User Manual
Code Composer
This module is fully compatible with the Code Composer Studio debug and
development environment. This extends to both the software and JTAG debugging
hardware. The driver to use is the tixds64xx_11.dvr. CCS version 3.0 or later is
required as the reprogramming utility (SMT6001) requires it.
Troubleshooting
Our Knowledge data base and FAQ sections may help you to resolve some known
issues.
Application Development
Depending on the complexity of your application, you can develop code for SMT365
modules in several ways.
SMT6400
For simple applications, the Sundance SMT6400 software support package (project
examples) and its associated header files (SmtTim.h and ModSup.h) can suffice.
The SMT6400 product is installed by the Sundance Wizard and it is free of charge.
3L Diamond
This module is fully supported by 3L Diamond, which Sundance recommends for all
but the simplest of applications. A SMT365e has to be declared as appropriate in
configuration files as one processor of type:
• SMT365E
SMT6500
This is the support package for the FPGA . It may be used to develop your application
in the FPGA of the module.