Code composer – Sundance SMT319 User Manual

Page 33

Text mode
Original mode

Version 1.0.7

Page 33 of 45

SMT319 User Manual

Code Composer

This module is fully compatible with the Code Composer Studio (CCS) debug
environment (version 2 or later). This extends to both the software and JTAG
debugging hardware.
The name of the C64xx CCS device driver is tixds64xx_11.dvr, and should be
obtained from Texas Instruments. In case of difficulty please contact
[email protected].

FIRST TIME DOWNLOAD

When you open CCS and want to download an application, after power up, you might
get the following error message:
“Can’t set breakpoint: Cannot set/verify breakpoint at 0x8C40” (the address might be
different)
Workaround: Reset the board first with a server or you should infer a CPU Reset
from Debug\reset CPU. Then you should run the processor.
You can then stop the processor and load your application