Sundance SMT364 - Manual (Page 29)

Version 1.0 Page 29 of 37 SMT364 User Manual
Register 0x1 –Channel data routing – Triggers.
There is one external Trigger signal per pair of ADCs. Channels A and B are coupled
together. So are Channels C and D. Each trigger signal can be active high or low.
Bit number Description
Bit 31 0
Bit 30 0
Bit 29 0
Bit 28 1
Bit 27
Bit 26
Bit 25
Bit 24
Bit 23
Bit 22
Bit 21
Bit 20
Bit 17-19
Bit 16
Bit 15
Bit 14 Route D
Bit 13 Route C – Bit 1
Bit 12 Route C – Bit 0
Bit 11 Route B – Bit 1
Bit 10 Route B – Bit 0
Bit 9
Bit 8 Route A
Bit 7
Bit 6
Bit 5 Channel C and D - Trigger Level (‘0’=Active low; ‘1’=Active high)
Bit 4 Channel C and D - Trigger Enable (‘0’=External Trigger Disabled; ‘1’=Enabled)
Bit 3
Bit 2
Bit 1 Channel A and B - Trigger Level (‘0’=Active low; ‘1’=Active high)
Bit 0 Channel A and B - Trigger Enable (‘0’=External Trigger Disabled; ‘1’=Enabled)