Sundance SMT349 - Manual (Page 29)

Version 2.1 Page 29 of 32 SMT349 User Manual
12.4.12 IF/RF Synthesizer Register 8 – 0xB.
For more details, refer to Si4136 datasheet.
IF/RF Synthesizer Register 8 – 0x0B
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Reserved RIF
Default ‘000’ ‘00000’
0 RIF
Default ‘00000000’
IF/RF Synthesizer Register 8 – 0x0B
Setting Bit 12…0 Description – RIF (R Divider for IF Synthesizer)
0 RIF : 7 to 8189 if Kpl = ‘00’
8 to 8189 if Kpl = ‘01’
10 to 8189 if Kpl = ‘10’
14 to 8189 if Kpl = ‘11’
12.4.13 Update Register – 0xD.
Update Register – 0xD
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved Reserved RF/IF
Synthesizer
Update
Default ‘000000’ ‘0’
Update Register – 0xD
Setting Bit 0 Description
0 0 Normal Mode.
1 1 Loads RF/IF Registers into the Synthesizer.
Note: The Update bits get cleared automatically.
Default ‘00000000’