Sundance SMT6035 v.2.2 - Manual (Page 14)

Version 2.2 Page 14 of 39 SMT6035 User Manual
SMTOpen OpenRes;
};
The information returned is summarized in the table below:
Field
Description
Type Specifies the type of carrier board.
cszType String description of the type of carrier board. For
example “SMT310Q”
nBase The PCI base address that the host operating system
has assigned to this carrier board.
nRange The number of bytes from the base address that has
been assigned to this carrier board.
HwStatus The hardware status of the carrier board. Valid values
are SMT_On and SMT_Off.
LockStatus If the carrier board could be opened successfully, this
value will be SMT_LOCK_OK.
OpenRes If the software was initialized correctly, this value will be
SMT_OPEN_OK.
10.7 SmtGetError
Returns a string description of the error value.
Prototype:
const char * SmtGetError( SMTRet Error );
Parameters:
Error The error value.
Return value:
A textual translation of the error value.
10.8 SmtGetDLLVer
Returns the version information for libsmtdrv.so.
Prototype:
SMTRet SmtGetDLLVer( UINT &nMaj, UINT &nMin );
Parameters:
nMaj Receives the major version number.
User Manual - Version 2.2, 04/01/07; © Sundance Italia S.R.L.