Sundance SMT107 - Manual (Page 9)

Version 1.2 Page 9 of 16 SMT107 User Manual
7. The device properties window should appear. In the “General” tab check that the device
is working properly then select the “Resources” tab…
8. Make a note of the first I/O address (in this case 0x280) as this address will be required
later,
9. Click “OK” to close the properties window,
10. Click “OK” to close the System window,
11. Close the “Control Panel”,
12. Proceed to the Setting Up Code Composer Section of this manual.