Sundance SMT107 - Manual (Page 5)

Version 1.2 Page 5 of 16 SMT107 User Manual
Before You Start
Please take a few minutes to read this guide and acquaint yourself with both the installation
process and the features of your card. Installation is simple, but you must take care to follow
the instructions carefully.
Check the Contents
After opening and unpacking the box, you will find the following items:
1. SMT107 PCMCIA card,
2. SMT107 POD,
3. PCMCIA card cable (1m long),
4. JTAG cable (10cm long),
5. SMT107 Software Driver CD-ROM or Floppy Disk,
6. Installation Guide (this document).
PC System Requirements
In order to install the SMT107 and Code Composer for C6000, your PC will have to meet the
following requirements:
1. A 486 or later processor with a minimum of 512MB Ram,
2. 1.5GB free hard disk space. This is for a standard CCS3.1 Platinum installation,
3. Microsoft Windows 2000 or later (Windows XP is advised),
4. Code Composer 3.0 (or later) or Code Composer Studio 2.2x (or later),
5. A free PCMCIA 16 bit slot.