Sundance SMT107 User Manual
Page 11
Version 1.2
Page 11 of 16
SMT107 User Manual
5. The User Information screen will appear:
6. Enter your name and company and then enter the serial number of your SMT107 board,
this should be clearly marked on both the board itself and on the packaging. Now click
“Next >”. The driver installation will complete and you will be asked to restart the
computer.
7. Click “Finish”, remove the SMT107 installation floppy and allow the computer to reboot.
8. Once the computer has rebooted, proceed to the Setting Up Code Composer Section of
this manual.
NOTE: When installing the SMT107 in a Windows NT4 systems, the Base IO address will
always be 0x240. This is due to a limitation in the support for PCMCIA cards under Windows
NT4. If another device is already using IO port 0x240, then it will be necessary to either
remove or disable that device in order to allow the SMT107 to work correctly.
- SMT6035 v.2.2 (39 pages)
- SMT6012 v.4.6 (22 pages)
- FC100 (12 pages)
- FC108 v.1.1 (10 pages)
- SMT6065 v.4.0 (45 pages)
- FFT v.2.1 (19 pages)
- SMT111 (18 pages)
- SMT118LT (10 pages)
- SMT118 (20 pages)
- SMT123-SHB (13 pages)
- SMT128 (15 pages)
- SMT145 (18 pages)
- SMT148 (35 pages)
- SMT130 v.1.0 (46 pages)
- SMT148FX (48 pages)
- SMT310Q (55 pages)
- PARS (70 pages)
- SMT166-FMC (52 pages)
- SMT166 (44 pages)
- SMT300Q v.1.6 (61 pages)
- SMT310 v.1.6 (50 pages)
- SMT317 (24 pages)
- SMT326v2 (24 pages)
- SMT338 (19 pages)
- SMT349 (32 pages)
- SMT339 v.1.3 (27 pages)
- SMT338-VP (22 pages)
- SMT358 (25 pages)
- SMT351T (37 pages)
- SMT351 (25 pages)
- SMT350 (45 pages)
- SMT362 (30 pages)
- SMT365G (23 pages)
- SMT364 (37 pages)
- SMT373 (15 pages)
- SMT368 (24 pages)
- SMT370v3 (46 pages)
- SMT377 (22 pages)
- SMT381 2007 (31 pages)
- SMT381-VP (81 pages)
- SMT387 (42 pages)
- SMT391 (18 pages)
- SMT384 (47 pages)
- SMT390-VP (55 pages)