Studio Technologies 92 - Manual (Page 13)

Model 92 User Guide Issue 1, December 2006
Studio Technologies, Inc. Page 13
and pin mode, or vice-versa. As previously
discussed, only when the cable mode is
selected for FK37 to FK37 or XLR to XLR is
it possible to select pin mode. The indicator
light associated with the active cable mode
is used to display whether channel mode or
pin mode is selected. When channel mode
is selected the light is lit steadily. The light
will flash to indicate that pin mode is select-
ed. The selected mode, channel or pin, will
remain in effect until it is manually changed.
Powering down the Model 92 will not cause
this mode to change or revert to a “default”
setting.
Figure 5. Model 92 Configuration—Channel/Pin Mode
The active cable mode
LED will flash when pin
mode is active.
Press and hold “down” button to select
between channel and pin mode. Pin
mode is only available in the FK37 to
FK37 and XLR to XLR cable modes.