Studio Technologies 58 1998 - Manual (Page 53)

Model 58/59 User Guide Issue 2, April 1998
Studio Technologies, Inc. Page 53
for Surround
Signal Signal
Connections High (+) Low (–) Shield
MONITOR A 24 12 25
NOT USED 10 23 11
MONITOR B 21 9 22
NOT USED 7 20 8
METER 18 6 (See Note 3) 19
NOT USED 4 17 (See Note 3) 5
NOT USED 15 3 16
NOT USED 1 14 2
Notes: 1) Connector type on Model 58 is 25-pin D-subminiature
female. Installer must provide plug (male). Connector
uses 4-40 threaded inserts for locking with mating plug.
2) Wiring scheme loosely follows Tascam DA-88
convention. Modified DA-88-type wiring harnesses are
required, along with 4-40 screw threads.
3) Meter outputs are unbalanced. Pins 6 and 17
internally connected to Model 58 shield.
Figure 13. Single-Channel Mode Connector Pin
Out for Outputs
Signal Signal
Connections High (+) Low (–) Shield
SEND 1-1 24 12 25
RETURN 1-1 10 23 11
SEND 1-2 21 9 22
RETURN 1-2 7 20 8
NOT USED 18 6 19
NOT USED 4 17 5
NOT USED 15 3 16
NOT USED 1 14 2
Notes: 1) Connector type on Model 58 is 25-pin D-subminiature
female. Installer must provide plug (male). Connector
uses 4-40 threaded inserts for locking with mating plug.
2) Wiring scheme loosely follows Tascam DA-88
convention. Modified DA-88-type wiring harnesses are
required, along with 4-40 screw threads.
Figure 14. Single-Channel Mode Connector Pin
Out for Inserts