Studio Technologies 58 1998 - Manual (Page 32)

Issue 2, April 1998 Model 58/59 User Guide
Page 32 Studio Technologies, Inc.
for Surround
When an insert button and
an output channel button is
pressed at the same time,
use these buttons to select
the insert mode.
Model 59 Configuration Chart—Insert 1 and 2
When an insert button is
pressed, pressing the output
buttons (one at a time) allows
the display and selection of
the insert mode.
Default: All channels associated with both inserts are in mode 3, return audio replaces normal audio.
Note 1: This is the hardest configuration to understand and perform! Two buttons must be simultaneously pressed
to display the mode; three buttons must be simultaneously pressed to change a configuration. A little
practice and it becomes easy!
Note 2: If all channels are set for mode 2 the insert function is disabled. This feature is provided so that the
operator won’t attempt to enable an unused insert, hopefully minimizing confusion.
When an insert button and an output
channel button is pressed at the same
time, the insert mode is displayed.
Press and hold one of the
insert buttons to allow the
display and selection of
the insert mode.
LED 1 lit means mode 1, mute normal signal flow;
LED 2 lit means mode 2, maintain the normal signal flow;
LED 3 lit means mode 3, replace the normal signal with the return signal;
LED 4 lit means mode 4, sum (combine) the return signal with the normal signal.
&