Studio Technologies 58 1998 - Manual (Page 30)

Issue 2, April 1998 Model 58/59 User Guide
Page 30 Studio Technologies, Inc.
for Surround
Press and hold an input
button (one at a time) to
display and select which
channels associated with
that input will be active.
Model 59 Configuration Chart—Input Channels Supported
When an input button
is pressed, use these
buttons to select which
input channels will be
active for that input. When an input button is
pressed, these LEDs display
which input channels are
active for that input. A lit LED
indicates that the channel is active.
Default: All eight possible input sources are active for each input.
Note: When all channels associated with an input are disabled, all LEDs will flash to indicate this condition.
In this mode the input is disabled from use during normal operation. If an input is not going to have a
source associated with it, deselect all input channels! Then during normal operation this input will not be
able to be selected, minimizing the confusion caused by selecting an invalid input source.
&