Datalogic Scanning F732 - Manual (Page 35)

TROUBLESHOOTING
6
Ed.: 06/01 29
6 TROUBLESHOOTING
PROBLEM CAUSE REMEDY
Flat batteries. Recharge
terminal. When the
button
is pressed the
terminal does not
come on.
Batteries
completely flat or
broken. Replace
batteries.
Flat batteries. Recharge
terminal. When the
button
is pressed, the
terminal display s
the message
BATTERY LOW and
switches itself off.
Batteries
completely flat or
broken. Replace
batteries.
There is no power
supply to the
cradle. Connect the
power supply and
switch on the
cradle.
The terminal will
not load the
application
program.
The serial cable is
not correctly
connected. Check the
connection to the
cradle and the
serial port of the
computer.