Studio Technologies 216 - Manual (Page 17)

Model 216 User Guide Issue 1, July 2014
Studio Technologies, Inc. Page 17
• Talkback Button: In this mode the side-
tone function will be active whenever the
audio signal is present on either or both
of the talkback output channels.
• Main and Talkback Buttons: In this mode
the sidetone function will be active when-
ever the audio signal is present on the
main and/or talkback output channels.
Headphone Control Assignment
Switches 7 and 8 are used to select the
functioning of the three rotary level controls.
• Audio input channel 1 is assigned to
the left headphone output channel and
audio input channel 2 is assigned to the
right headphone output channel. The
overall level of audio inputs 1 and 2 are
controlled by the rotary level control lo-
cated on the left side of the front panel.
The balance (relative level) of both these
signals is controlled by the rotary level
control located in the center of the front
panel. Sidetone audio is assigned to
both the left and right headphone output
channels and its level is controlled by
the rotary level control on the right side
of the front panel. Audio inputs 3 and 4
are not used.
• Audio input channel 1 is assigned to
the left headphone output channel and
audio input channel 2 is assigned to
the right headphone output channel.
The overall level of audio inputs 1 and 2
are controlled by the rotary level con-
trol located on the left side of the front
panel. Audio input channel 3 is assigned
to the left headphone output channel
and audio input channel 4 is assigned
to the right headphone output channel.
The overall level of audio inputs 3 and 4
are controlled by the rotary level control
located in the center of the front panel.
Sidetone audio is assigned to both the
left and right headphone output chan-
nels and its level is controlled by the
rotary level control on the right side of
the front panel.
• Audio input channel 1 is assigned to
the left headphone output channel and
its level is controlled by the rotary level
control on the left side of the front panel.
Audio input channel 2 is assigned to the
right headphone output channel and
its level is controlled by the rotary level
control located in the center of the front
Figure 7. Headphone control assignment switch
settings
There are four choices available:
• Audio input channel 1 is assigned to the
left headphone output channel and its lev-
el is controlled by the rotary level control
on the left side of the front panel. Audio
input channel 2 is assigned to the right
headphone output channel and its level
is controlled by the rotary level control
located in the center of the front panel.
Sidetone audio is assigned to both the
left and right headphone output channels
and its level is controlled by the rotary
level control on the right side of the front
panel. Audio inputs 3 and 4 are not used.