Studio Technologies 68A 2001 - Manual (Page 20)

Issue 1, March 2001 Model 68A/69A User Guide
Page 20 Studio Technologies, Inc.
for Surround
Auto Downmix
The downmix function can be configured
to automatically enable whenever the
mono function is enabled. This is provided
to ensure accurate monitoring of surround
sources when mono is enabled. This is the
default mode, although it can be changed
as desired.
Restore Factory Defaults
The restore factory defaults function is
provided primarily for factory use. In
this way a system can be shipped with
the default settings selected. While you
are welcome to use this function, be care-
ful so that your configuration efforts aren’t
wasted. Specifically, be aware that the
reference level is reset to minimum level.
All the other parameters are fairly easy to
set up, but resetting the reference level
would require getting out an SPL meter
and a calibrated signal source. This is a
hassle you may not need!