SoundTraxx SoundCar Users Guide - Manual (Page 42)

Tsunami SoundCar User’s Guide Page 38
To enable any of the functions from F1‑F8 for analog operation, refer to
Table M. Circle the numbers corresponding to any functions you want to
enable, and then add up the circled numbers and program the sum into
CV 13.
Table M.
CV 13 – Analog Function Enable 1
F1 F2 F3 F4 F5 F6 F7 F8
1 2 4 8 16 32 64 128
Likewise, to enable functions F0 (forward and reverse) and F9‑F12, refer to
Table N. Circle the numbers corresponding to functions you want to enable,
and then add up the circled numbers and program the sum into CV 14.
Table N.
CV 14 – Analog Function Enable 2
F0(f) F0(r) F9 F10 F11 F12
1 2 4 8 16 32
Note: When you enable a particular function for analog mode operation, it
has the same effect as pressing the equivalent function key on your DCC
cab. The SoundCar’s function mapping settings will ultimately determine
which output or sound effect is activated by the enabled function.
Miscellaneous Features