SONOSAX SX-M32 - Manual (Page 4)

User manual SONOSAX SX-M32 Page 4 of 25
1. INTRODUCTION
Congratulations for choosing the SONOSAX SX-M32 professional portable audio mixer. Based on a high
technology design, it has been manufactured to deliver many years of excellent performances.
As with all SONOSAX products, the SX-M32 mixer is built without any compromise in quality, using only the best
components available and a severe quality control. The result of this research and development project is an
ergonomic recorder with extraordinary characteristics and an excellent reliability.
The information and instructions contained in this manual are necessary to ensure safe operations of your
equipment and to maintain it in good working condition; please read it carefully
2. GENERAL DESCRIPTION
The SONOSAX SX-M32 is an analogue audio mixer with digital output of the last generation, designed in 2008,
using the latest available technologies, with the unequalled SONOSAX design and ergonomics.
Our 30 years of experience have helped us to develop and build this mixer which is designed to sustain a long life-
span, despite an intensive use under the worst possible conditions. It can be used under the rain and is resistant
to water splashes.
Built in strong, rugged and anodized aluminium housing, the SONOSAX SX-M32 provides the best solution
whenever top performance, versatility and small size are important. All potentiometers are especially made for
SONOSAX and watertight according to IP45. All capacitors are of professional type, with low loss and a long life-
span
2.1 MAIN FEATURES
♦ Small sized and lightweight portable audio ENG/EFP stereo mixer
♦ Electronically balanced (transformer less) Input and Output
♦ Choice of output connectors (options)
♦ High quality potentiometers and switches, resistant to water projection ( IP45 )
♦ Microphone preamps with semi-discrete technology, ultra low noise
♦ Primary passive LF-Cut ( high pass) to protect the microphone preamplifier
♦ 48V Phantom power, 20dB PAD and phase reversal on each input
♦ Protection Limiter on each of the 3 inputs
♦ M/S decoder available on Input 1&2 and on the Monitoring selector
♦ LED Meter indictors on each input with level and overload indication
♦ Large scale level meter for Master and Monitoring
♦ Independent, linkable, output Limiters
♦ Main analogue outputs available in several format( balanced, unbalanced, mono )
♦ Direct channels outputs available Pre and Post fader ( on optional connector )
♦ Digital output AES, 48 & 96kHz at 24 bits, configurable to 48/16 - 96/24 or 48/24 – 192/24
♦ Powered either from internal batteries or external DC voltage 6 to 18Volts
♦ Low power consumption