SONOSAX SX-M32 User Manual
Page 23
User manual SONOSAX SX-M32
Page 23 of 25
7. SPECIFICATIONS
All specifications mentioned below are given for standard models. SONOSAX SAS SA reserves the right to
change these data at any time without notice
For measurements and/or adjustment, the reference is: 0dBu = 0.775V (+6dBu = 1.55V, +4dBu = 1,23V)
7.1.1 Summary of characteristics
Frequency response:
25Hz to 250kHz
Maximal Gain:
78dB on the Gain plus 20dB on the Fader = total 98dB of gain
Overall dynamic:
119dB
Crosstalk: >60dB
Modulometre:
Fast Peak meter
Working temperature:
-25°C [-13°F] to 70°C [158°F]
GAIN 98dB
Fader at max
78dB
Fader at 0
58dB
Fader at 0
38dB
Fader at 0
18dB
Fader at 0
0dB
PAD -20dB
Nominal level:
-92dBu
-72dBu -52dBu -32dBu -12dBu +6dBu
Maximum level:
-45dBu
-25dBu -10dBu +2dBu +14dBu +34dBu
THD+N* <0.08%
<0.08%
<0.02% <0.01% <0.01% <0.01%
CMRR** >100dB
>100dB
>100dB
>90dB
>65dB
>60dB
Noise LIN**
-127.6dBu
-127.6dBu
-126.5dBu
-120.8dBu
-108.8dBu -90.5dBu
* 22 Hz to 22 kHz, at maximum input level
** Equivalent input noise from a 150
Ω source
Output noise
Channel Faders at 0dB:
-92,0dBu
Channel fader closed:
-98,8dBu
7.1.2 Input
MIC/LINE Input
Input type:
electronically balanced, transformer-less
Input Impedance:
2.5k
Ω
RF Filters:
built in standard
PAD attenuation:
-20dB
Pre-LF Cut:
passive filter, 130Hz / 6dB per octave
Sweep LF Cut:
active filter, adjustable from 25 to 340Hz, 12dB per octave
Alimentation micro:
+48V [phantom power]
BUS IN Input
Input type:
unbalanced, stereo
Sensivity:
nominal line level, direct feed on the mix busses (+6dBu or +4dBu)
Bus In impedance:
9k
Ω
RETURN Input
Input type:
unbalanced, stereo
Sensivity:
adjustable form -20 to +6dBu or –22 to +4dBu according to peak meters
Return impedance:
2k
Ω to 12kΩ depending on sensivity adjustment
7.1.3 Outputs
MAIN outputs
Output type:
electronically balanced, transformer-less
Oupput impedance:
<50
Ω
Nominal output level:
+6dBu or +4 dBu as specified at the order
Maximal output level:
+19dBu @600
Ω / +21dBu @10kΩ