SONOSAX SX-M32 User Manual
Page 21
User manual SONOSAX SX-M32
Page 21 of 25
6.1.3 Purchase order form
Distributor / Dealer: ………………………………….…. P.O. nr : ……..………… Date of order : …………………..
Customer, end user: ………………………………….... Serial Nr: ……………….. Expected delivery date: …………
Communications / Notes: ……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………………………………………….
……………………………………………………………………………………………………………………………………………….
STANDARD VERSION
2 x XLR3-M and one blank panel
DIRECT OUTPUTS VERSION "A"
DIRECT OUTPUTS VERSION "B"
2 x XLR-3M and 1 x XLR-7-M for direct out
1 x XLR-5M for Main L&R, 1 x XLR-7-M for direct out
and
1
x
Blank
panel
OPTION PANELS
HIROSE 10 Pin
TAJIMI 12 Pin
HIROSE 12 Pin
NEUTRIK
MINICON
OTHER
RM15TRD-10S
PRC 05R 12F
HR10A-10R-12S MRF12
Please
specify
TECHNICAL SET-UP
** denotes standard factory set-up
Nominal output Line Level:
+4dBu
+6dBu** Line Level at balanced outputs, for 0 reading on peak-meter
SUB-OUT ATT Output level:
…….. dBu In ATT position the output level can be adjusted from -24dBu** to +6dBu
MONO-OUT ATT Output level:
…..… dBu In ATT position the output level can be adjusted from -24dBu** to +6dBu
MASTER LIMITER:
Set at Nominal Line Level**
Set at -3dBFS for protection of the A/D Converter
PFL Activation :
activated with LF Cut knob only**
activated with either LF CUT or GAIN
PFL or AFL monitoring
PFL monitoring** ( Pre Fader )
AFL Monitoring ( After Fader )
Modulometers:
Follow the Monitor selector**
Always indicates Main Out Levels
A/D Converter, Fs and bit rates:
48 / 96 kHz at 24 bits**
48 kHz dithered to 16 bits / 96kHz at 24 bits
Digital Ouptut:
AES-31** transformer balanced
SPDIF output
For any purchase order of SONOSAX SX-M32, Please check the appropriate boxes and return this form to SONOSAX
by e-mail :
or by Fax.: +41 21 651 01 09