SONOSAX SX42 - Manual (Page 9)

SX42 User's Manual Page 9 of 26
3.4
Switching On The Mixer
• Using D-cells, NiCd or NiMH batteries
Insert four D-cell batteries with their negative side first in the battery compartment located on
the right side of the mixer. Then set the POWER switch located on the front right corner, on
the ON position to turn on the unit. The LED between the two level meters must come green,
if not:
¾ Check that batteries have been inserted correctly inside the battery compartment,
with their negative side first!
• Using the external DC power supply
Connect the external power supply DC plug to the DC IN connector located on the left side of
the mixer. Then set the POWER switch located on the front right corner of the mixer on the
ON position to turn on the unit. The LED between the two level meters must come green, if
not:
¾ Check that the DC output voltage selector located on the external power supply is on
the 12V position.