Smithco Spray Star 1750D (sn 175D180 – Current) Parts & Service Manual - Manual (Page 73)

71
Accessories
14-308 HOSE REEL PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 17-537 Square U-bolts 2
2 15-841 Reel Platform 1
3 15-840 Mount Brackets 2
4 HB-38-16-300 Bolt 3 /
8
- 16 x 3 4
HNTL-38-16 Lock Nut 3 /
8
- 16 4
HW-38 Waher 3 /
8
4
5 16-906 Electric Hose Reel 1
16-129 Manual Hose Reel 1
18-249 Brass Fitting 3 /
4
MPT x 3 /
4
HB 1
6 15-853 Support Bracket 1
7 HB-1420-100 Bolt 1 /
4
-20 x 1 1
1. Wear protective clothing when draining the tank and taking apart the lines.
2. Drain tank and spray system in a safe and approved method insuring that no chemical or water remain in
tank as you will be taking apart lines.
3. Remove key from ignition, set park brake and block wheels.
4. Install hose reel mount on the left side of the machine over the rear wheel.
5. Use the clamps and bolts to secure the mount to the machine.
6. Install the support bracket from the reel platform to the tank carrier using the 1" bolt.
7. Put hose reel on hose reel bracket with fitting to the rear of machine. Use four bolts 5 /
16
- 18 x 1 1 /
2
and four
5 /
16
- 18 lock nuts to hold in place. Tighten bolts.
8. Put 18-249 barb fitting into hose reel.