Manual setup, Option setup – Denon AVP-A1HDCI User Manual
Page 5
5
GUI Menu Map
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
Manual Setup
ROOM EQ
STANDARD
ENTER
uio p
STANDARD
ROOM EQ
[ AMP]
[PARA]
ENTER
uio p
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Make detail settings for various parameters.
Setup
Option Setup
Make various other settings.
F
Menu tree F
Manual Setup
Option Setup
a
GUI
s
Remote (SIRIUS/XM)
d
232C Port (1)
f
Add New Feature
a
GUI
Make GUI related settings.
Master Volume
Master volume display during adjustment.
[Selectable items]
Bottom
Top
OFF
If the Master Volume display is superimposed on the fi lm subtitles
making it diffi cult to see, select the “Top” setting.
s
Remote (SIRIUS/XM)
Set when operating SIRIUS from the main remote control unit.
Set the XM TUNER (DEV2) mode on the main remote control unit
to SIRIUS.
[Selectable items] TUNER (DEV2) : XM
TUNER (DEV2) : SIRIUS
NOTE
When set to “TUNER (DEV2) : SIRIUS”, TUNER (DEV2) mode cannot
be used for XM.
d
232C Port (1)
Set when external controller or 2-way remote control unit (RC-
7000CI and RC-7001RCI, sold separately)
is connected.
[Selectable items]
Serial Control
: Set when using an external controller.
2Way Remote
: Set when using a 2-way remote control unit.
NOTE
• When using the 2-way remote control unit, connect to port 1 of the
RS- 232C connector.
• When using a 2-way remote control unit, set this to “2Way
Remote”.
In this case, you can not use port 1 of the RS-232C connector as an
external controller.
f
Add New Feature
Display the new features (payment required) which can be
purchased for downloading to the AVP-A1HDCI / AVR-5308CI and
upgrade.
When you purchase a new feature and register your user information,
“Registered” is displayed on this menu and you can proceed with the
upgrade.
When “Not Registered” is displayed on the Add New Feature screen,
you cannot upgrade.
To use the upgrade function, you should purchase an upgrade package
from the DENON website.
To purchase the package, you will need the ID number shown on this
screen.
To display the ID number on the screen, hold the
<p>
and
buttons down for 3 seconds or more.
Upgrade Status
A list of the additional functions provided by the Upgrade will be
displayed.
Do not turn off the power or disconnect from the network during an
upgrade.
1.AVP-A1HDCI_AVR5308CI_2nd.indd 5
2008/09/03 9:22:43