Smithco Tournament Roller 7530 Operator Manual - Manual (Page 23)

MAINTENANCE
JUMP STARTING
To jump start (negative grounded battery):
1. Shield eyes.
2. Connect ends of one cable to positive (+) terminals of each battery, first (A) then (B).
3. Connect one end of other cable to negative (-) term inal of “good” battery (C).
4. Connect other end of cable (D) to engine block on unit being started (NOT to negative (-)
terminal of battery)
To prevent damage to other electrical components on unit being started, make certain that
engine is at idle speed before disconnecting jumper cables.
21
Use of booster battery and jumper cables: Particular care should be
used when connecting a booster battery. Use proper polarity in order
to prevent sparks.