Smithco Tournament Roller 7530 Operator Manual - Manual (Page 18)

DAILY CHECKLIST FOR 7530, 7575, 7580 & 7590
DAILY CHECKLIST
Use all procedures and parts prescribed by the manufacturers.
Read the engine manual before operation.
The suggested maintenance checklist is not offered as a replacement for the manufacturer’s list,
but as a supplement. You must adhere to guidelines established by manufacturer for warranty
coverage. In adverse conditions such as dirt, mud or extreme temperatures, maintenance
should be more frequent.
1. Check engine oil level. Add as needed. DO NOT OVERFILL.
2. Examine vehicle for damage or anything unusual to normal wear.
3. Inspect electrical system for loose connections or frayed wiring, including battery cables.
Replace any faulty equipment or tighten if loose.
4. Check hardware for loose or missing nuts, bolts, set screws, etc., and tighten or replace
as needed.
5. Listen for any noise, such as rattles due to loose hardware, scraping sounds, or unusual
motor noises. Be sensitive to abnormal performance.
6. Inspect hydraulic lines for damage or leaks. Never use hands to inspect leaks.
7. Inspect all lubrication areas around pedal shafts, chassis parts, etc.
8. Inspect steering.
9. Assure that all switches are operating normally.
10. Check hydraulic oil. To replenish, use 10W-40 or 10W-30 Motor Oil API Service SG.
11. Check controls for smooth, proper working operation. Lubricate as needed.
12. Wash accumulated dirt daily from motor compartment and under body.
16
NOTE :