Smithco Tournament Roller 7530 Operator Manual - Manual (Page 14)

CONTROLS & INSTRUMENTS FOR 7530, 7575, 7580 & 7590
IGNITION SWITCH
Located on right side of seat housing. This is a three-position ignition switch; Stop
– Run –
Start.
A. Choke: Choke is located on the left side of the seat housing. Pull choke control knob
out to close choke plate when starting a cold engine. A warm engine may not
require “choking” to start.
B. Hand Throttle: Hand throttle is located on left side of the seat housing.
C. Fuse & Fuse Holder: 30 AMP fuse is used.
STEERING
Acquaint yourself with steering before operating machine. The automotive type steering wheel is
connected to the roller assembly by a chain driven sprocket. This allows for quick turns and
short turning radius.
SEAT ADJUSTMENT
Seat adjustment lever is located under front of seat on left side. It provides seat adjustment
forward or backward for operator’s comfort.
FOOT PEDALS
RIGHT FOOT PEDAL
The right foot pedal is used for going to the right. When the pedal is released the roller will come
to a slow stop. To bring the roller to a sudden stop press on the left foot pedal a little to reverse
rollers to bring unit to a stop.
LEFT FOOT PEDAL
The left foot pedal is used for going to the left. When the pedal is released the roller will come to
a slow stop. To bring the roller to a sudden stop press on the right foot pedal a little to reverse
rollers to bring unit to a stop.
12