Smithco Tournament Roller 7530 Operator Manual - Manual (Page 17)

OPERATION
STARTING ENGINE
Before operating this machine, become familiar with all controls and functions of these units.
Also complete all maintenance requirements and read all safety warnings. By knowing the
machine thoroughly, how it operates and by doing the prescribed maintenance steps, you can
expect relatively trouble-free operation for years to come.
1. The ignition switch is a three-position.
Insert key and turn clockwise until
engine starts (C). Release key and it
will return to run position (B). Use choke
as necessary.
2. Allow engine to idle and warm up a few
minutes.
3. To select a direction press down on the
right or left foot pedal. Always come to a
complete stop before going another direction.
4. To shut off engine, turn the key to the “OFF” position.
15