SILVA ADC Summit - Manual (Page 64)

Data Log Mode -
To Review the Logged Data
15.6.2
To Review the Logged Data
!
!
If a data is selected, the record number and
data number appear on the 1st row of the
display. The logging date and time (the time
such data was logged) appear on the 2nd
and 3rd row of the display. The temperature
and
appear on the 4th row
of the display.
To review the other information of the
selected data, press the [mode] button
following the adjacent diagram.
!
!
!
Following the previous 'To Select the
Logged Record' section to select the target
record.
Once a record is selected:
Press the [reset] button to scroll forward to
select the target data among the logged
data (from data 1 to the last data) following
the adjacent diagram.
Or press the [set] button to scroll backward
to select the target data among the logged
data (from last data to data) following the
adjacent diagram.
relative humidity
The wind
speed, temperature, barometric pressure,
and the altitude at the current location will
appear one by one.
Data Log Display
(Data 1)
Date & Time
Barometric Pressure
Wind Speed
Altitude
Data Selection Sequence
-0001
R001 -0001
R001 -0001
R001 -0001
R001 -0001
2:10.30
2:10.30
2:10.30
2:10.30
2:10.30
06 MAR 2003
06 MAR 2003
1001.3 hPa
21.3 Km/H
144 m
[set]/
[reset]
[mode]
[mode]
[mode] [mode]
[mode]
data
no.
[set]/[reset]
[set]/[reset]
[set]/
[reset]
the next
Logged
Data
the last
Logged
Data
001
C
B
temperature
wind speed
altitude
data no.
relative
humidity
barometric
pressure
logging
date &
time
record
no.
RXXX
28.0 C 8 88.2% 28.0 C 8 88.2%
28.0 C 8 88.2%
28.0 C 8 88.2% 28.0 C 8 88.2%