SILVA ADC Summit - Manual (Page 53)

scroll
the setting
faster
scroll the
setting by
increment
of 1 step
[reset]
hold
[reset]
Alarm ON Alarm OFF
Altitude Alarm Setting
[set]
To Set the Altitude Alarm
!
!
!
Following the previous 'Altimeter Mode
Setting Sequence' to select the Altitude
Alarm Setting Display.
When the altitude alarm digits are flashing,
press the [reset] button to scroll by 1 to
select target altitude level (hold down the
button to scroll the setting faster), or press
the [set] button to select the between
altitude alarm ON and OFF.
When the above settings finished, press and
hold the [mode] button for about 2 seconds
to exit the setting sequence or press the
[mode] button to set the other settings.
18.3 8.3
W.CHILL C 8
Altimeter Mode -
Setting the Altitude Alarm
14.6.1
ALTITUDE m
144
ALTITUDE m
144
1800
ON OFF
- - - -
flash