Dymo LT100-H - Manual (Page 5)

5
Inserting the Label Cassette
Your label maker comes with one label cassette. Visit
www.dymo.com for information about purchasing additional
label cassettes.
To insert the label cassette
1. Press and release the label
cassette cover to open the label
compartment. See Figure 3.
Before using the label
maker, remove the protective
cardboard insert from label exit
slot.
2. Insert the cassette with the
label positioned between the
print head and pinch roller. See
Figure 4.
3. Press firmly until cassette clicks
into place.
4. Close the label cassette cover
and press to turn on the
power.
Remove
cardboard insert
Figure 3
!
Figure 4