Sierra Video RTR-804 - Manual (Page 13)

SIERRA VIDEO
7
Installation
Introduction
Installation procedures are similar for all modules covered under this manual. Exceptions,
if any, have been noted in each of the following paragraphs.
Module Mounting
Carefully inspect the module to ensure that there has been no shipping damage. Make
sure all shipping material is removed from the module and frame.
Install the RTR and rear module in any available slot in the frame with the ejector tab
towards the bottom. Lock the module in place with the ejector tab.
Rear I/O Panel
OG-RTR-10 and OG-RTR-20
The 10 slot frame uses the I/O module: OG-RTR-10. The 20 slot frame uses the OG-
RTR-20. These rear modules are used for all models of the OG-RTR module.
Chapter 2