Sensoray 3011S User Manual

Page 25

Firmware update

The Firmware Update window displays the versions of the device's firmware

components and the serial number.

To update the firmware, choose the file (

s3011.fw

provided by Sensoray) and press

Submit. The firmware update should take about 30 seconds to complete. Do not unplug

the device while the firmware update is in process. If a firmware update is interrupted,

the device will attempt to load from a backup firmware image. During the update the red

LED flashes and update status is displayed in the Firmware Status field of the web page.

If the update has completed successfully a message “Firmware result: ok” is displayed in

a pop-up window. All device settings are preserved across the firmware update.

To reset all parameters on the device, click the Reset Parameters button. That will reset

the network settings as well, but the change to those will take effect only after the power

is cycled. This allows setting an IP address different from the default even after

parameters reset, if necessary.